Model SUK

SUBMERSIBLE PUMPS FOR SUMPS　-For Waste/Dirty Water Closed Loop Cooling Arrangement-

Model SUK

Submersible pumps for waste/dirty water handling internal motor cooling allows for continuous run dry operation
　 

■Efficient closed loop motor cooling system allows for dry operation

■Motor cooling loop is completely isolated from pumping fluid

■Prevent protection against possible trouble

■Non-clogging centrifugal impeller are standard 　 E.I.M. also can provide the following option upon request 　 Vortex impeller 　 Screw centrifugal impeller

Model Discharge No. of Poles Motor Output Rated Head Rated Flow Solid Handing Power Cable Weight Free Standing Ebow Assembly mm inch kW HP m ft m3/min l/s mm mm2×Core×Length(m) kg SUK-88E SUK-88B 80/65* 3 4 5.5 8 20 66 0.6 10.0 29 3.5×4×8 180 SUK-810E SUK-810B 4 7.5 10 25 82 0.6 10.0 29 5.5×4×8 190 SUK-815ED SUK-815DB 4 11 15 25 82 1.0 16.7 29 5.5×3,4×8 290 SUK-820ED SUK-820DB 4 15 20 30 98 1.2 20.0 29 14×3,4×8 300 SUK-108E SUK-108B 100 4 4 5.5 8 10 33 1.5 25.0 34 3.5×4×8 180 SUK-1010E SUK-1010B 4 7.5 10 15 49 1.5 25.0 34 5.5×4×8 190 SUK-158E SUK-158BH 150 6 4 5.5 8 6 20 2.0 33.3 55 3.5×4×8 190 SUK-1510E SUK-1510BH 4 7.5 10 10 33 2.5 　 60 5.5×4×8 200 SUK-1515ED SUK-1515DBH 4 11 15 15 49 2.5 　 44 5.5×3,4×8 300 SUK-1520ED SUK-1520DBH 4 15 20 15 49 3.0 50 44 14×3,4×8 310 SUK-1530ED SUK-1530DB 4 22 30 20 66 3.0 50 35 14×3,4×8 670 SUK-2015ED SUK-2015DBH 200 8 4 11 15 10 33 4.0 66.7 55 5.5×3,4×8 330 SUK-2030ED SUK-2030DBH 4 22 30 15 49 5.0 83.3 55 14×3,4×8 700 SUK-2040ED SUK-2040DBH 4 30 40 18 59 5.0 83.3 55 22×3,4×8 750 SUK-2050ED SUK-2050DBH 4 37 50 22 72 5.0 83.3 55 22×3,4×8 750 SUK-2060ED SUK-2060DBH 4 45 60 30 98 5.0 83.3 55 38×3,4×8 1,000 SUK-3050ED SUK-3050DB1B 300 12 6 37 50 15 49 8.0 141.7 75 22×3,4×8 1,100 SUK-3550ED SUK-3550DB1B 350 14 6 37 50 10 33 14.0 233.3 75 22×3,4×8 1,150 SUK-4060ED SUK-4060DB1B 400 16 6 45 60 9.5 31 18.0 300 75 38×3,4×8 1,300 SUK-50100ED SUK-50100DB1B 500 20 8 75 100 10 33 30.0 500 85 38×3,4×8 2,500 SUK-60220ED SUK-60220DB1B 600 24 8 160 220 11 36 60.0 1,000 100 100×3,4×8 4,000

　
・A motor protector (bimettalic auto cut) is installed for motors under 7.5kW.
・Thermal protection for motor windings and a water penetration detector are standard equipment. 
・Mark * shows availability of discharge sizes, on request.
・Weight indicates the values of free-standing type.
・Power cable : 2PNCT